285/70R17 Tire Size Specifications
Complete dimensional breakdown in inches and millimeters, approved wheel rim widths, vehicle fitments, speedometer error tables, and safe plus-sizing alternatives.
285/70R17 Technical Dimension Table
Standardized measurements computed according to ETRTO & ISO 4000-1 passenger and commercial tire design formulas.
| Specification Property | Imperial (Inches / Miles) | Metric (Millimeters / Kilometers) |
|---|---|---|
| Overall Rolling Diameter | 32.71 in | 830.8 mm |
| Section Width (Cross-section) | 11.22 in | 285 mm |
| Sidewall Cushion Height | 7.85 in | 199.4 mm |
| Circumference (Rolling Distance) | 102.76 in | 2610.1 mm |
| Revolutions per Distance | 636 revs/mile | 395 revs/km |
| Wheel Rim Diameter | 17 in | 431.8 mm |
| Approved Rim Width Range | 7.7" – 10.0" | 196 – 254 mm |
| Measuring / Ideal Rim Width | 8.8 in | 224 mm |
| Aspect Ratio (Profile %) | 70% of section width | |
What 285/70R17 Is Typically Used For
Dimensions in this range are typical of pickups, SUVs and off-road fitments, where load capacity and sidewall strength matter more than steering response.
To find the size your specific vehicle takes, check the placard on the driver-side door jamb or your owner's manual. Fitment depends on model year, trim, brake caliper clearance, wheel offset and suspension setup, so the correct size for your car is the one the manufacturer specifies.
Safe Alternative Sizes for 285/70R17 (±3% Rule)
These tire sizes stay within 3% of the 32.71" original diameter, keeping speedometer error minimal and preventing ABS/traction control faults.
Frequently Asked Questions about 285/70R17
What size is 285/70R17 in inches?
The 285/70R17 tire measures approximately 32.71" in overall diameter, 11.22" in section width (tread/sidewall cross-section), and is mounted on a 17" diameter wheel rim.
What rim width is recommended for 285/70R17?
The approved rim width range for 285/70R17 is 7.7" to 10.0" wide, with an ideal measuring rim width of 8.8" for optimal tread contact and even wear.
What are the closest safe alternative sizes for 285/70R17?
The closest safe tire sizes within the industry standard ±3% diameter limit include 235/85R17, 275/70R18. These sizes maintain accurate speedometer calibration and clearance.
How many revolutions per mile does 285/70R17 make?
A standard 285/70R17 tire rotates approximately 636 revolutions per mile (395 revs per kilometer) at normal inflation pressure and rolling radius.