20" WheelTruck, SUV and 4x4~31.91" x 10.83"

275/55R20 Tire Size Specifications

Complete dimensional breakdown in inches and millimeters, approved wheel rim widths, vehicle fitments, speedometer error tables, and safe plus-sizing alternatives.

Overall Diameter31.91"810.5 mm
Section Width10.83"275 mm
Sidewall Height5.95"151.1 mm
Revs / Mile652405 revs/km

275/55R20 Technical Dimension Table

Standardized measurements computed according to ETRTO & ISO 4000-1 passenger and commercial tire design formulas.

Specification PropertyImperial (Inches / Miles)Metric (Millimeters / Kilometers)
Overall Rolling Diameter31.91 in810.5 mm
Section Width (Cross-section)10.83 in275 mm
Sidewall Cushion Height5.95 in151.1 mm
Circumference (Rolling Distance)100.25 in2546.4 mm
Revolutions per Distance652 revs/mile405 revs/km
Wheel Rim Diameter20 in508.0 mm
Approved Rim Width Range7.4" – 9.6"188 – 244 mm
Measuring / Ideal Rim Width8.5 in216 mm
Aspect Ratio (Profile %)55% of section width

What 275/55R20 Is Typically Used For

Dimensions in this range are typical of pickups, SUVs and off-road fitments, where load capacity and sidewall strength matter more than steering response.

Truck, SUV and 4x4
Tall sidewall for load capacity and impact absorption
Wide section width for a larger contact patch
Common in all-terrain and mud-terrain tread patterns
Typically carries an LT (Light Truck) or higher load range

To find the size your specific vehicle takes, check the placard on the driver-side door jamb or your owner's manual. Fitment depends on model year, trim, brake caliper clearance, wheel offset and suspension setup, so the correct size for your car is the one the manufacturer specifies.

Frequently Asked Questions about 275/55R20

What size is 275/55R20 in inches?

The 275/55R20 tire measures approximately 31.91" in overall diameter, 10.83" in section width (tread/sidewall cross-section), and is mounted on a 20" diameter wheel rim.

What rim width is recommended for 275/55R20?

The approved rim width range for 275/55R20 is 7.4" to 9.6" wide, with an ideal measuring rim width of 8.5" for optimal tread contact and even wear.

What are the closest safe alternative sizes for 275/55R20?

Always verify rolling diameter stays within ±3% of 31.91" to prevent transmission strain and speedometer inaccuracies.

How many revolutions per mile does 275/55R20 make?

A standard 275/55R20 tire rotates approximately 652 revolutions per mile (405 revs per kilometer) at normal inflation pressure and rolling radius.

Privacy & Analytics

Cookie Preferences

We use essential cookies to maintain calculator states and optional anonymous metrics to keep this automotive engineering tool 100% free.